Montagem Demorada (KIT)
Auto leveling: SuperPINDA
Recuperação de impressão: Sim
Plataforma: Magnética e Flexível
Rápido aquecimento
Resolução: 0.05-0.25 mm
Velocidade: + 200 mm/s
Temperatura do Nozzle: max 280°C
Temperatura da cama: max 100ºC
2209 Trinamic Drivers para impressão silenciosa
Área de impressão: 180 * 180* 180mm
Materiais: PLA, PETG, ASA, ABS, PC, etc.
Conexão: Ethernet
Media: Usb drive
Fonte de alimentação comutável 110V / 240V
Dimensões da mesa: 500X500
Montagem não incluida
Para costumizar a impressora entre em contacto connosco!
Product Features
Full-auto Calibration
Multi-Color Printing (Combo Version)
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume
The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.
Dimensões da mesa: 500X500
Montagem não incluida
Para costumizar a impressora entre em contacto connosco!
Prusa Mini
Pronta a utilizar (Plug and Play)
Auto leveling: SuperPINDA
Recuperação de impressão: Sim
Plataforma: Magnética e Flexível
Resolução: 0.05-0.25 mm
Velocidade: + 200 mm/s
Temperatura do Nozzle: max 280°C
Temperatura da cama: max 100ºC
2209 Trinamic Drivers para impressão silenciosa
Área de impressão: 180 * 180* 180mm
Materiais: PLA, PETG, ASA, ABS, PC, etc.
Conexão: Ethernet
Media: Usb drive
Fonte de alimentação comutável 110V / 240V
Product Features
Multi Color & Multi Material Capability
High quality printing with 7 μm Lidar Resolution
High speed CoreXY with 20000 mm/s² Acceleration
Dual Auto Bed Leveling
Product Features
Works right out of the box, set up in 15 minutes
Well-polished hardware and software
Enclosed-body for high-temperature filament printing
Up to 16-color printing with AMS
Up to 20000 mm/s² acceleration, prints a benchy in 18min
Built-in camera for remote monitoring and timelapse
Product Features
Full-auto Calibration
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume
The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.
Product Features
Multi Color & Multi Material Capability
High quality printing with 7 μm Lidar Resolution
High speed CoreXY with 20000 mm/s² Acceleration
Dual Auto Bed Leveling
Product Features
Set up in 15 minutes
High-speed 3D printing with up to 20000 mm/s² acceleration
Upgradeable and customizable flexibility
Compatible with AMS for multi-color printing
State-of-the-art electronics
Pack dia da Criança:
Caneta 3d + Recarga de Filamentos
Dimensões da mesa: 500X500
Montagem não incluida
Para costumizar a impressora entre em contacto connosco!
Product Features
Full-auto Calibration.
4-Color Printing with AMS lite.
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.
Product Features
Works right out of the box, set up in 15 minutes
Well-polished hardware and software
Enclosed-body for high-temperature filament printing
Up to 16-color printing with AMS
Up to 20000 mm/s² acceleration, prints a benchy in 18min
Built-in camera for remote monitoring and timelapse
Product Features
Full-auto Calibration.
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.
